Easy Up 15' Telescoping Mast - TV WIFI HAM Antenna - EZ TM-20-U-95

Description

EASY UP EZ TM-20-U-95 TELESCOPING MAST
UPS Shippable
Genuine Easy Up Product - Made in the USA
Perfect for mounting antennas for TV, Ham Radio, WIFI, Scanner, etc
Use in guyed or bracketed installations
15' assembled height
Mast hardware included
2 Sections of heavy duty galvanized tubing
Features 2 guy rings that rotate
Features a heavy duty thumbscrew/collar system for setting height
Weighs 25 lbs
Shipping Length: 95"
Mast Section Dimensions:
Bottom Section: 1-1/2" OD (18 AWG)
Top Section: 1-1/4" OD (16 AWG)
Masting is overlapped for added strength and stability.
NOTE: GUYS, GUY HARDWARE, ANCHORS, AND MOUNT ARE NOT INCLUDED.
*
*
*
EASY UP PRODUCTS ARE PROUDLY MADE IN THE USA
*
*
*
Contact with a power line can KILL you. Choose a safe installation site.
Mast must be guyed approximately every 9' at the top of each piece of tubing with the distance from the base of the mast to the anchor equal to the height of the mast attachment point.
Anchors should be spaced every 120" if three guy directions are used, or every 90" if four guy directions are used.
The base and all anchors must be properly grounded.
Antenna load should not exceed 2 sq ft of surface area
Do not attempt installation or dismantling if there is any wind or on a wet day
Tie off mast with rope (non metal) to deflect away from power line if it should fall during installation or dismantling
Use adequate and skilled help in working with this product and have an experience supervisor
If you are in doubt as to the proper use or method of installation or dismantling, contact an experienced installer and your local electrical utility for assistance.
Express shipping available. See shipping details for options.
Illinois purchases are subject to 6.5% sales tax